Starlight Xpress TRIUS CMOS Cameras

Introducing cooled CMOS cameras to the SX product portfolio.

USB 3 CMOS Imaging Cameras with "No Glow" Technology.

CMOS technology is moving ahead at a fast rate. With Quantum Efficiencies (QEs) starting to rival those of traditional CCDs, along with low read-noise figures, some slightly below that of our CCD cameras, CMOS is starting to become a viable alternative.

For fast planetary imaging, CMOS is now the dominant sensor, however, it does suffer from amplifier glow which is inherent in all CMOS sensors and is a problem for deep-sky imaging. Many users stack thousands of short images together to achieve a longer exposure time, and this method is useful to help reduce tracking and seeing errors, however, it limits the signal to noise ratio for each frame and is not as good as adding several long exposure frames together. In both cases, it is critical to ensure that you have good calibration frames to help with the removal of amplifier glow. It can also require a lot of processing power and disk space when manipulating hundreds or thousands of stacked images together.

It has always been virtually impossible to eliminate amplifier glow without post-processing techniques, which means manipulating the raw data, often before it arrives at the computer. The engineers at Starlight Xpress were not about to be beaten!

After working for a few months, experimenting with various clocking routines we have developed a methodology that will allow you to take up to 15 minute exposures with minimal glow, while maintaining your raw data. We call this our ‘’No Glow Technology”; (Even Sony have asked us how we do it!)

As with all of the TRIUS range of cameras, SX have incorporated a USB hub into the main camera, which offers 3 x USB 2.0 ports at the rear of the camera. Each port is capable of delivering up to 200mA, and is able to drive a Lodestar, or UltraStar for guiding and another two USB ports for our USB filter wheels etc.

This integration greatly reduces the number of cable trails back to the computer and gives less potential cable tangling around the mount during your imaging session.

New 3 stage Peltier cooler combinations have been designed into the CMOS TRIUS cameras, along with the Argon-filled sensor chamber for delivering good cooling to the CMOS sensors.

Technical Specs:

Sensor: IMX304 12.3MP
Size: 14.13 x 10.35 at 4096 x 3000 (3.45um x 3.45um)Pixels
Read Noise: 3e-
Physical Size: 75mm x 70mm
Weight: 1lb
Full Well Depth:>11K
Data Format:12 bit

Sensor: IMX249 2.3MP
Sensor Size: 11.52 x 7.2 1920 x 1200 at(6um x 6um)
Read Noise: 3e-
Physical Size:75mm x 70mm
QE: 80%
Weight: 1lb
Full Well Depth: >33K
Data Format: 12 bit

Sensor: IMX290 2.13MP
Sensor Size: 5.61x 3.175 at 1945 x 1097 (2.9um x 2.9um)
Read Noise:3e-
Physical Size: 75mm x 70mm
QE: 80%
Weight: 1lb
Full Well Depth: >15K
Data Format: 12 bit